|
Air
Knife Dimensions and Inlet Orientations
Gap Size: Standard air knife
gaps: 0.035", 0.045" - Custom sizes from 0.020" to 0.070" are
possible.
Finish: Both stainless steel
and aluminum air knives are polished.
Air
Knife Inlet Length: Standard length is 8" - Optional
lengths up to 18". |
  |
Dimensions |
Model |
 |
 |
 |
 |
Inlet OD |
1.5" |
2.0" |
2.0" |
3.0" |
Manifold
OD |
2.5" |
3.0" |
3.5" |
5.5" |
Height |
3.5" |
5.75" |
6.0" |
10.0" |
Length |
Up to
30" |
Up to
60" |
Up to
60" |
Up to
154" |
Material |
Stainless
Steel |
Aluminum |
Stainless
Steel |
Stainless
Steel |
 Air-Knife
Measurements:
This illustration the manifold OD and height measurements
for an aluminum extruded air knife. For the diamond
air knife models, the manifold OD is the upper-right
side (as shown above); the height is the lower-right
side. The Micro-Body air knife manifold OD is the
top of the triangle, and the height is measured
along the right side, or the extended edge of the
air knife. For all air knife models, the length
is considered to be the effective length,
not including the inlets.
|
|
