Ro-Flo® sliding vane
compressors are ideally suited to handle corrosive and/or dirty gases such
landfill and digester gases. Their outstanding reliability and durability
is inherent to the design of this oil-flooded vane compressor. The Ro-Flo
units will deliver years of continuous service with no loss of volume or
pressure, even in the most severe applications. Because the only wearing
parts are bearings, blades and seals, maintenance costs are minimal. When
routine maintenance is required, the simplicity of the design makes this
process easy on-site, without removing the compressor from the system.
All components use heavy-duty construction to ensure strength, durability
and lasting value. More than 20 models are available in both low- and high-pressure
configurations for a wide range of applications and industries.
Design
• Rotor blades are constructed
of durable laminated cloth
impregnated with phenolic resin, and are heat-treated to minimize
wear at elevated temperatures
• Self-adjusting, radially
sliding vanes maintain constant pressure
and flow rate
Performance
• Inlet volumes: up to 6,271
m³/h
• Pressure: up to 130 psi
Aircom Technologies can
package units with
• Single or two-stage compressors
• Direct coupling or belt
drive
• Compressor cooling systems
• Forced lubrication systems
• Inlet and interstage moisture
separators
• Interstage or after coolers
• Chillers
Applications
• Landfill gas
• Digester gas
• Hydrocarbon vapors
• Natural gas/fuel gas
• Coal bed methane
• Acid gas
• Sour gas (up to 92% H2S)
• Refrigeration
• Condenser vacuum
• Wellhead pressure reduction
• Process vacuum
• Polymerisation gas |
...
...
...
...
...
...
...
...
...
...
 |
