514-695-47401-888-940-4740 • [[pm:info]]

Home > Products > Compressed air dryers > Desiccant – GDHM Series

Contact us now!

[[pm:sales]]
[[pm:parts]]
[[pm:service]]
[[pm:info]]

Desiccant – GDHM Series

Compressed air dryers 3-50 scfm

Desiccant compressed air dryers GDHM Series are sold by Aircom Technologies, Montreal, Quebec. Tel: 514-695-4740


The GDHM Series desiccant compressed air dryers use the proven “Pressure Swing Adsorption” (PSA) method for drying wet compressed air.
This requires having two identical towers containing hygroscopic desiccant.
The unique design of the GDHM Series
allows for the dryer to start and stop with a compressor or point-of-use equipment to eliminate purge loss when off. The solid
state memory feature allows the dryer to start where it left off in the drying cycle to prevent wet air downstream.

  • 3 – 50 SCFM
  • Maximum Working Pressure: 150 PSIG
  • Maximum Inlet Temperature: 120°F
  • Pressure Dewpoints to -100°F
  • Unique Energy Saving Design
  • Eliminate purge loss with remote
    stop/start control

Design Advantages

  • Solid state timer with LED display for
    visual monitoring
  • Built in timer memory
  • Low velocity air through the desiccant for more efficient drying
  • Large internal air passages to reduce
    pressure drop
  • NEMA 4 Components (protects against water spray and dust)
  • Minimal threaded connections, for fewer
    leak points than competitive units
  • Easy change out desiccant cartridges
  • Components are all easily serviced and
    field replaceable. (No special tools)
  • Full repressurization before tower switch-over causes less shocking of the desiccant and
    no pressure fluctuation
  • No Plug Mufflers (Will not rupture or
    reduce dryer efficiency)
  • 6-ft. Electric Power Cord
  • 3-Year Limited Warranty (parts only — excluding contaminated desiccant and solenoid wear parts)

btn_pricing_request

 

Brochure


GDHM Series Air Dryers

btn_Download_ang
 
Vacuum pumps by Elmo Rietschle are sold by Aircom Technologies, Montreal,
Quebec
[bande_de_cie_2_alt]
Breathing air systems by Deltech are sold by Aircom Technologies,
Montreal, Quebec
Multistage centrifugal blowers by Hoffman & Lamson are sold by Aircom
Technologies, Montreal, Quebec
Multistage centrifugal blowers by Hoffman & Lamson are sold by Aircom
Technologies, Montreal, Quebec
Centrifugal and axial fans by Howden (American Fan Company) are sold by
Aircom Technologies, Montreal, Quebec
Single stage centrifugal blowers by Vortron are sold by Aircom
Technologies, Montreal, Quebec
Rotary vane compressors for biogas applications by Ro-Flo are sold by
Aircom Technologies, Montreal, Quebec
Open and enclosed flare systems by John Zink Hamworthy are sold by Aircom
Technologies, Montreal, Quebec

© 1999-2016 Aircom Technologies inc. All rights reserved. Privacy policy.
16781 Hymus blvd, Kirkland (Montreal), Quebec, Canada H9H 3L4       T : 514 695-4740       1 888-940-4740       F : 514 695-0581